Global Streams GlobeCaster STUDIO 4000, Manual

Page: 25 / 144

21 GlobeCaster
Swi t che r M anu al
The default softness is
1
, which is a hard edge. A softness of
60
gives the wipe
a nice soft edge.
5. Click the
Reversed
button.
The default direction for this wipe is clockwise. When reversed, this effect
wipes counter-clockwise.
Now we want to change the look of the wipe’s border.
6. Click the
Border
button and select
Solid Color
from the pop-up menu.
7. Click the colored box next to the Border button to bring up the Effect
Border Color
panel.
You see the panel appear next to the Program and Preview monitors
(Figure 2.20).
Figure 2.20: The Effect Border Color Panel
8. Click on any of the 16 color boxes in the lower right corner of this panel.
These small color picons represent pre-mixed colors.
You see this color appear in the box next to the Border button in the Effect
Properties panel.
9. Close the Effect Border Color and Effect Properties panels.
10. Click
Auto
.
You see the image transition in the Program monitor. Note the soft edges and
color border as the transition wipes counter-clockwise.
11. Close this panel by clicking on the small “x” after you have chosen your color.
When this wipe is reloaded as the current effect, it reverts to its default settings.
However, there are two ways to save the effect you created. One method creates a
new file, while the other replaces the original file with your new properties. To save
your effect as a new file, simply drag-and-drop the picon from the display above