2.0
ASSEMBLY AND INSTALLATION
TRANSCEIVER
SUPPORT
BRACKET
KA OR KU
M8x30 SCREWS,
SPRING WASHERS &
PLAIN WASHERS
BACKFRAME
FEED SUPPORT ARM
BOOM SUPPORT
PLATE
ANTENNA
M6x25 SCREWS,
SPRING WASHERS,
NUTS AND PLAIN
WASHERS
SIDE STRUT
7.
Assemble the feed support arm to the backframe using the Qty
2 of boom support plates. Note: Orientation “UP”
arrow on Boom
Support Plate
, Qty 8 of M8x30 Screws, spring washers and plain
washers (Hardware Kit 7580678), also assemble the transceiver
support bracket to the feed support arm using Qty 4 of M8x30
screws, spring washers and plain washers (Hardware Kit 7580678).
Do not fully tighten at this time.
8.
Assemble Qty 2 of side struts to the antenna using Qty 4 of
M6x25 screws, spring washers, Qty 2 of nuts and Qty 6 of plain
washers (Hardware Kit 7580672), do not fully tighten at this time.
6
