102 - 122
5.3
.
0
- REMOVAL OF THE COLLECTOR
CHANNEL
1 / 1
from
2000
to
••••
WORKSHOP MANUAL
page
5.3 REMOVAL OF THE COLLECTOR CHANNEL
Removing the collector channel gives access to:
– the small side wheels of the drive belt;
– the traction engagement control rod (
➤
in hydro-
static drive models).
Removal of the collector channel is indispensable
for dismantling the cutting deck and if the rear plate
is to be removed.
Undo the rear plate inner fixing screws
(1)
and pull out
the collector channel
(2)
.
On reassembly, ensure that the collector channel is
properly housed on the cutting deck outlet, then fully
tighten the screws
(1)
, checking that the collector
channel can move freely when the cutting height is
changed.
Tightening torque
1
Screws for collector channel ............ 25 ÷ 30 Nm
3/2002
2
1
2
<= ... RET ... <=