EOL RESISTOR
Connecting EOL Resistor:
a.
Place EOL resistor on the last audio
device.
b. All 8 channels need an EOL resistor.
SETTING DELAY CONFIGURATION
Setting Delay Configuration:
a.
Set SW8 ON and the remain switches OFF.
b.
Power up the system, both module LEDs should
blink intercalated.
c.
Set the desired relay output by setting SW1,SW2
and SW3 as listed on the Relay Output table.
d.
Set the desired delay by setting SW4,SW5, SW6 and
SW7 as listed on the Delay Value table.
e.
Set SW8 down to save configurations.
MORE INFO >> GLOBALFIRE-EQUIPMENT.COM
