Global American GAI-LCD Series A 2007598 User Manual Download Page 119

Page: 119 / 125

GAI-LCD Series A

Monitor

Page 119

Figure 6-6: OSD Configurations Menu

OSD Configurations are described below.

OSD Time Out:

Determines how many seconds the OSD screen stays on screen before it

disappears when OSD is left unattended.

OSD Position:

Adjusts the OSD position on the screen. Position 1 is in the upper left of

the screen, position 2 in the upper right and position 3 in the center.

OSD Transparency

Determines the opacity of OSD background.

Auto Setting

This function automatically adjusts the LCD screen position in situations

such as connecting the LCD to a different host computer.

Recall

Restores the default OSD settings. Note that this will restore all default

display settings.

Aspect Ratio

Adjusts the display ratio referring to the width of the screen and then to

the height of the screen.

Summary of Contents for GAI-LCD Series A 2007598






























































































































Search results

Summary of Contents for GAI-LCD Series A 2007598

Reviews:

Related manuals for GAI-LCD Series A 2007598

Brands by name

Popular brands

Global American GAI-LCD Series A 2007598, User Manual

Search results

Summary of Contents for GAI-LCD Series A 2007598

Reviews:

Related manuals for GAI-LCD Series A 2007598

Brands by name

Popular brands