Global American GAI-LCD Series A 2007598 User Manual Download Page 2 | Manualshive

Page: 2 / 125

background image

Page 2

Global American, Inc.

REVISION HISTORY

Title

GAI-LCD Series A

Monitor User Manual

Revision

Number

Description

Date of Issue

1.0

Initial release

November 2006

1.10

-

Updated Figure 1-4 and Section 4.4 for

DVI/VGA

AD Board V2.0

April 2007

1.11

-

DVI/VGA

AD Board CN25 connector pin 3 voltage

changed to +9V~+36V input

May 2007

ABOUT THIS MANUAL

This document covers the description and installation instructions for the GAI-LCD Series A

Monitors. The monitors in this series include the 2007610, 2007608,

2007606, 2007604, 2007602, 2007600 and 2007598.

Copyrights

This manual is copyrighted and all rights are reserved. It does not allow any non authorization in
copied, photocopied, translated or reproduced to any electronic or machine readable form in
whole or in part without prior written consent from the manufacturer.

In general, the manufacturer will not be liable for any direct, indirect, special, incidental or

consequential damages arising from the use of inability to use the product or documentation, even
if advised of the possibility of such damages. The manufacturer keeps the rights in the subject to
change the contents of this manual without prior notices in order to improve the function design,

performance, quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to update the
information contained herein.

Trademarks

Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.

All other trademarks, products and or product's name mentioned herein are mentioned for
identification purposes only, and may be trademarks and/or registered trademarks of their
respective companies or owners.

«
1
2
3
4
...
»

Summary of Contents for GAI-LCD Series A 2007598






























































































































Reviews:

No comments

Related manuals for GAI-LCD Series A 2007598

Brand: Samsung Pages: 13

Brand: Vidikron Pages: 76

Brand: WAGNER Pages: 2

Brand: Deco Gear Pages: 32

PerfectView M5L

Brand: Waeco Pages: 156

Brand: Digimate Pages: 22

Brand: ViewSonic Pages: 132

Brand: Omron Pages: 34

Brand: ViewSonic Pages: 26

Brand: SIGRIST Pages: 108

Brand: Omron Pages: 130

Brand: Samsung Pages: 115

Brand: Lenovo Pages: 31

Brand: LG Pages: 21

Brand: LG Pages: 24

Brand: LG Pages: 30

Brand: LG Pages: 33

Brand: LG Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands