Global American 3307740, User Manual

Page: 49 / 132

3307740 PICMG 1.3 CPU Card
Page 53
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the 3307740
may result in permanent damage to the 3307740 and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the 3307740. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the 3307740, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
„ Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
„ Self-grounding :- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
„ Use an anti-static pad : When configuring the 3307740, place it on an
antic-static pad. This reduces the possibility of ESD damaging the 3307740.
„ Only handle the edges of the PCB :- When handling the PCB, hold the PCB
by the edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the 3307740 is unpacked, please do the following:
„ Follow the anti-static precautions outlined in Section 3.1.
„ Make sure the packing box is facing upwards so the 3307740 does not fall out
of the box.
„ Make sure all the components shown in Section 3.3 are present.