Global American 3307740 User Manual Download Page 109

Page: 109 / 132

3307740 PICMG 1.3 CPU Card

Page 113

The optional 7.1 channel audio kit connects to the 10-pin audio connector on the 3307740.

The audio kit consists of five audio jacks. One audio jack, Mic In, connects to a

microphone. The remaining four audio jacks, Line-In, Front-Out, Rear-Out, and Center

Subwoofer, connect to speakers. To install the audio kit, please refer to the steps below:

Step 1:

Connect the audio kit cable.

The audio kit is shipped with a cable that

connects the audio kit to the 3307740. Connect the cable to the connector on

the back of the audio kit. Make sure the pins are properly aligned (i.e. pin 1

connects to pin 1).

Step 2:

Locate the audio connector

. The location of the 10-pin audio connector is

shown in

Chapter 3

Step 3:

Align pin 1

. Align pin 1 on the onboard connector with pin 1 on the audio kit

cable connector. Pin 1 on the audio kit cable connector is indicated with a white

dot. See

Figure 5-11

Figure 5-12: 5.1 Channel Audio Kit

Step 4:

Mount the audio kit onto the chassis

. Once the audio kit is connected to the

Summary of Contents for 3307740





































































































































Search results

Summary of Contents for 3307740

Reviews:

Brands by name

Popular brands

Global American 3307740, User Manual

Search results

Summary of Contents for 3307740

Reviews:

Brands by name

Popular brands