Global American 3307740 User Manual Download Page 105

Page: 105 / 132

3307740 PICMG 1.3 CPU Card

Page 109

NOTE:

GLOBAL AMERICAN has a wide range of backplanes available.

Please contact your 3307740 a Global American sales representative

or visit

the

Global American

website.

website

www.globalamericaninc.com

to find out more about the

available chassis.

5.5.3 CPU Card Installation

To install the 3307740 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in

Table 5-6

are shipped with the 3307740.

Quantity

Type

1 IDE

Cable

1 KB/MS

cable

SATA drive cables

SATA drive power cable

Table 5-6: GLOBAL AMERICAN Provided Cables

Optional cables are listed below:

TV out cable

Summary of Contents for 3307740





































































































































Search results

Summary of Contents for 3307740

Reviews:

Related manuals for 3307740

Brands by name

Popular brands

Global American 3307740, User Manual

Search results

Summary of Contents for 3307740

Reviews:

Related manuals for 3307740

Brands by name

Popular brands