Global American 2807940 User Manual Download Page 45

Page: 45 / 170

2807940 uATX Motherboard

Page 29

Programmable host memory Rx buffers (256 B-16 KB)

Descriptor ring management hardware for Tx and Rx

Mechanism for reducing interrupts from Tx/Rx operations

Integrated PHY for 10/100/1000 Mbps (full- and half-duplex)

IEEE 802.3ab* auto-negotiation support

IEEE 802.3ab PHY compliance and compatibility

Tx/Rx IP,TCP,and UDP checksum offloading

Tx TCP segmentation

IEEE 802.1q* Virtual Local Area Network (VLAN) support with VLAN tag

insertion, stripping, and packet filtering for up to 4096 VLAN tags

Boot ROM Preboot eXecution Environment (PXE) Flash interface support

SDG 3.0,WfM 3.0 and PC2001 compliant

Wake on LAN support

2.7 PCI Bus Components

2.7.1 PCI Bus Overview

The PCI bus is connected to the components listed below:

Two PCI slots

The PCI bus complies with PCI Local Bus Specification, Revision 2.3 and supports 33MHz

PCI operations.

2.7.2 PCI Slots

The Intel® ICH9DO Southbridge integrates a PCI arbiter that supports up to four PCI

Masters thereby enabling the 2807940 to support an additional two PCI bus Masters. The

PCI bus on the 2807940 is interfaced to two PCI slots thereby connecting the PCI

expansion boards to the Intel® ICH9DO Southbridge. The PCI slots are shown in

Figure

2-15

Summary of Contents for 2807940











































































































































































Search results

Summary of Contents for 2807940

Reviews:

Brands by name

Popular brands

Global American 2807940, User Manual

Search results

Summary of Contents for 2807940

Reviews:

Brands by name

Popular brands