manualshive.com logo in svg

Global American 2807940, User Manual

Share
Download
Global American 2807940 User Manual Download Page 145

 

 

2807940 uATX Motherboard 

Page 129 

 

 

NOTE: 

The compatible items described here have been tested by the GAI 

R&D team and found to be compatible with the 2807940. 

 

E.1 Compatible Operating Systems 

The following operating systems have been successfully run on the 2807940. 

„

 

Microsoft Windows XP (SP2)   

„

 

Fedora Core 7 

E.2 Compatible Processors 

The following Intel® LGA775 processors have been successfully tested on the 2807940. 

CPU 

Model Number 

Frequency 

FSB 

65nm Intel® Core™ 2 Duo 

E6850 

3.0 GHz 

1333 MHz 

65nm Intel® Core™ 2 Duo 

E6750 

2.66 GHz 

1333 MHz 

E.3 Compatible Memory Modules 

 

NOTE: 

The memory modules listed below have been tested on the 2807940 

other memory modules that comply with the specifications may also 

work on the 2807940 but have not been tested. 

The following memory modules have been successfully tested on the 2807940. 

Summary of Contents for 2807940











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands