Global American 2807940 Page 91 User Manual Download

Page: 91 / 170

2807940 uATX Motherboard

Page 75

When working with the 2807940, make sure that it is disconnected from

all power supplies and that no electricity is being fed into the system.

Before and during the installation of the 2807940

DO NOT:

Remove any of the stickers on the PCB board. These stickers are required for

warranty validation.

Use the product before verifying all the cables and power connectors are

properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its

components.

5.2.2 Installation Checklist

The following checklist is provided to ensure the 2807940 is properly installed.

All the items in the packing list are present

The CPU is installed

The CPU cooling kit is properly installed

A compatible memory module is properly inserted into the slot

The jumpers have been properly configured

The 2807940 is inserted into a chassis with adequate ventilation

The correct power supply is being used

The following devices are properly connected

SATA drives

Power supply

USB cable

Serial port cable

The following external peripheral devices are properly connected to the

chassis:

Keyboard/Mouse

VGA screen

USB devices

LAN

Summary of Contents for 2807940











































































































































































Search results

Summary of Contents for 2807940

Reviews:

Related manuals for 2807940

Brands by name

Popular brands

Global American 2807940, User Manual

Search results

Summary of Contents for 2807940

Reviews:

Related manuals for 2807940

Brands by name

Popular brands