Global American 2807940 Page 39 User Manual Download

Page: 39 / 170

2807940 uATX Motherboard

Page 23

The ICH9DO LPC interface complies with the LPC 1.1 specifications. The LPC bus from

the ICH9DO is connected to the following components:

BIOS chipset

Super I/O chipset

Trusted Platform Module (TPM) connector

2.5.6 Intel

ICH9DO PCI Interface

The PCI interface on the ICH9DO is compliant with the PCI Revision 2.3 implementation.

Some of the features of the PCI interface are listed below.

PCI Revision 2.3 compliant

33MHz

5V tolerant PCI signals (except PME#)

Integrated PCI arbiter supports up to four PCI bus masters

The PCI bus masters are interfaced to the following onboard components:

Two PCI sockets

2.5.7 Intel

ICH9DO PCIe x4 Bus

The Intel® ICH9DO Southbridge chipset has six PCIe x1 lanes. The four PCIe lanes are

interfaced to one PCIe x4 slot on the 2807940 motherboard.

One of the remaining PCIe x1 lanes is connected to an Intel® 82566DM GbE controller

and the other PCIe x1 lane is connected to an Intel® 82573L GbE controller.

For more detailed information, please refer to

Section 2.6.3

2.5.8 Intel

ICH9DO Real Time Clock

256 bytes of battery backed RAM is provided by the Motorola MC146818B real time clock

(RTC) integrated into the ICH9DO. The RTC operates on a 3V battery and 32.768KHz

crystal. The RTC keeps track of the time and stores system data even when the system is

turned off.

Summary of Contents for 2807940











































































































































































Search results

Summary of Contents for 2807940

Reviews:

Related manuals for 2807940

Brands by name

Popular brands

Global American 2807940, User Manual

Search results

Summary of Contents for 2807940

Reviews:

Related manuals for 2807940

Brands by name

Popular brands