42
/
48
protect your investment, never detach battery and leave the exposed battery docking
station in the rain. This will short and damage the battery.
CHARGER:
1.
The battery is charging when the LED light on the charger is red. When the battery is
100% charged, the light on the charger will go from red to green.
2.
The provided charger has a built-in overcharge protection to prevent the battery from
being overcharged.
3.
Charging time is approximately 3.5 hours for a fully discharged battery.
4.
Regularly inspect the charger for damage to the cord, plug, enclosure and other parts. In
the event of such damage, the charger must not be used until it has been repaired or
replaced.
5.
Unplug the charger from the wall outlet when not in use.
As a safety mechanism,
when the charger stops charging because either the battery is full or the charger
is disconnected from the scooter, the charger must be reset by unplugging it from
the wall outlet before it will resume charging.
6.
Use only the charger supplied with this scooter or a recommended replacement
specified by Glīon.
WARNING: Failure to confirm compatibility, properly install,
operate and maintain any charger, component or accessory can result in
serious injury or death.
INSTRUCTIONS FOR CHARGING:
1.
Turn the scooter off. Open the charge port rubber protective cover and securely plug
the charger into the charge port.
2.
Plug the charger into the power outlet.
3.
A solid red light on the charger indicates the battery is charging. A solid green light
indicates the battery is fully charged.
4.
Remove the plug from the power out
let, then remove the charger from the scooter’s
charge port. Secure the charge port rubber protective cover to protect port from the
elements.
Summary of Contents for SNAPnGO 335
Page 27: ...27 48...
