23
/
48
FOOT REST INSTALLATION
Step 1: Stand scooter up vertically on its 2 rear wheels and rear bumper (Vertical Self Standing
Position) for easy access before installing the footrests. You can find 3 bolt holes on each side of
the flanges at the bottom of the neck shown below. Footrests are bolted onto the flanges. Please
note: there are 2 settings for each footrest. The factory default is BACK position. If you prefer to
extend your feet more forward while riding, you can adjust to FORWARD position by re-bolting
the foot rests to the supporting beams.
Vertical Self Standing
Step 2: Using the wrench, bolts and washers provided, attach the foot rests to the flanges with the
flat washer against the scooter frame and the lock washer between the flat washer and the bolt
head.
Summary of Contents for SNAPnGO 335
Page 27: ...27 48...
