Arm Gate Motor
: Motor with gear assembly to open / close the gate.
Control Box-
This consists of Microprocessor based control circuits to supply drive
power to the motor. It also contains back up Battery and Radio Frequency Receiver.
Remote Transmitter:
This is hand held remote switch to signal open/close
operation. Range of the transmitter without any obstruction is approximately
100Mtrs.
Release Keys:
This key is used to release the motor mechanism to the gate in case
of any malfunction of the gate or during power failure.
Electro Magnetic Lock (EM Lock)
: This lock is attached to Gate with MOTOR 1.
While closing this lock gets locked to the slot and while opening, it gets released
itself and open. This acts like a tower bolt for added safety. This lock can be
disabled by using the release key provided.
Motor Layout
1.
Check the measurement ‘C’. If C is more than 110MM, it is ideal to use Roller
Swing/ UG series.
