14
KSTB2020 - User Guide
Volume and Mute Controlling Device Link
By default, the remote controls the Volume and Mute on the TV or Sound Bar. To
program the remote to control Volume and Mute on the STB, such that remote
can adjust volume on the Sound Bar by Infrared commands directly, follow the
instructions below:
•
Press and hold the until the remote LED turns green.
•
Press the key.
•
Successful programming is indicated by two green blinks of the LED.
•
Unsuccessful programming is indicated by two red blinks of the LED.
To return remote to default for Volume and Mute control on the TV or Sound Bar,
follow the instructions below:
•
Press and hold the key until the remote LED turns green.
•
Press the key.
•
Successful programming is indicated by two green blinks of the LED.
•
Unsuccessful programming is indicated by two red blinks of the LED.
Remote Behavior
If the remote has been programmed to the TV and Audio Systems as described on the
previous page, the remote’s TV power button ( ) will control the TV power only.
This will not affect the powered state of the STB. The “all devices” power button
( ) will control the TV power as well as the STB and audio system power states
if remote has been fully programmed with TV and Audio system.
The “all devices” power button ( ) may be used in two ways while system is
fully powered on:
Short Press:
Will turn off TV and Audio sub-system and put the STB into a
standby mode.
Long Press: User will be prompted if they want STB to be powered down
(non-standby) mode. If OK is selected, the TV, Audio system, and STB will all be
powered down. The STB will be fully powered down and not be in standby mode.
Set
Set
VOL
VOL
TV