10
KSTB2020 - User Guide
Volume and Mute Controlling Device Link
By default, the remote controls the Volume and Mute on the STB. To program the
remote to control Volume and Mute on the TV follow the instructions below:
• Press and hold the key until the remote LED turns green.
• Press the key.
• Successful programming is indicated by two green blinks of the LED.
• Unsuccessful programming is indicated by two red blinks of the LED.
To return remote to default for Volume and Mute control on the STB, follow the
instructions below:
• Press and hold the key until the remote LED turns green.
• Press the key.
• Successful programming is indicated by two green blinks of the LED.
• Unsuccessful programming is indicated by two red blinks of the LED.
Remote Behavior
If the remote has been programmed to the TV as described on the previous page, the
remote’s TV power button ( ) will control the TV power only.
This will not affect the powered state of the STB. The “all devices” power button
( ) will control the TV power as well as the STB power states
if remote has
been fully programmed with TV and Audio system.
The “all devices” power button ( ) may be used in two ways while system is
fully powered on:
Short Press:
Will turn off TV and put the STB into a standby mode.
Long Press: User will be prompted if they want STB to be powered down (non-
standby) mode. If OK is selected, the TV and STB will all be powered down. The
STB will be fully powered down and not be in standby mode.
Set
Set
VOL
VOL
TV