KSTB2020 - User Guide
9
Set
9
9
1
CH
TV / Remote Programming
By default, the remote controls the Volume and Power on the STB. To program the
remote to the TV, such that remote Master Power key presses adjust Power and
Volume on the TV by Infrared commands directly follow the instructions below:
• Press and hold the key until the remote LED turns green.
•
Enter the 5-digit code as shown in Appendix A
.
• Successful programming is indicated by two green blinks of the LED.
• Unsuccessful programming is indicated by two red blinks of the LED.
TV Code Auto-Search Method
If a code cannot be located in Appendix A or B, use this method to find control
programming:
• Press and hold the key for 3 seconds, until the LED turns green.
• On the remote Press .
• Press the sequentially until the TV turns off.
•
Press the OK / SELECT
key to enter this control into the remote.
• Successful programming is indicated by two green blinks of the LED.
Set