Glenayre Document Number: 9110.00148
RL-903 Receiver
Issue 1, Rev. C: 12/10/96
SPECIFICATIONS
2
SPECIFICATIONS
Table 2-1, Specifications, lists the specifications of the receiver.
All receiver tests were
performed per the ANSI/EIA-603/1992 standard, "Land Mobile FM or PM Communica-
tions Equipment Measurement and Performance Standards,
"
approved October 27, 1992,
and dated February 1993.
Table 2-1 Specifications
characteristic (unit of
measurement)
specification
frequency range (MHz)
922-960 (in special cases, to 902) in bands as
follows: 900-920, 920-940, 940-960
modulation acceptance (kHz)
wideband, +/-7.0
narrowband, +/-5.0
sensitivity (uV for 12-dB SINAD)
wideband, 0.35,
narrowband, 0.35
sensitivity (uV for 20 of quieting)
wideband, 0.5
narrowband, 0.5
channel spacing (kHz)
narrowband, 12.5
wideband, 25
adjacent-channel rejection (dB of rejec-
tion: wideband, 25 kHz; narrowband,
12.5 kHz)
wideband, -80
narrowband, -75
alternate-channel rejection (dB of rejec-
tion, wideband, 50 kHz; narrowband,
25 kHz)
wideband, -85
narrowband, -80
intermodulation (dB)
wideband, -80
narrowband, -75
spurious response (dB)
wideband, -100
narrowband, -100
maximum squelch sensitivity, TIGHT
(carrier) squelch (dBm)
wideband, -65
narrowband, -65
minimum squelch sensitivity, NOR-
MAL (noise) squelch (dBm)
wideband, -113
narrowband, -113
speaker output
distortion (percent)
5 or better
hum and noise (3-kHz deviation with
1-kHz tone) (dB)
wideband, -40
narrowband, -40
output power (W)
1.5
Copyright
© 1996 Glenayre
Page: 2-1
Print Date: 12/05/96