4
Quick start
Welcome to @ctiveLink two-way messaging. This section gives you an overview
of the steps you take to start using the @ctiveLink wireless messaging module.
If the Handspring Visor
ä
Handheld computer is new to you, be sure to
familiarize yourself with it by reading the guides included in the box before you
begin using the @ctiveLink module. Become acquainted with the Handspring
Visor Handheld home screen, and with Handspring Visor Handheld features
such as the address book and Graffiti writing.
The diagram on the facing page shows the @ctiveLink module in the handheld
computer. The diagram identifies @ctiveLink features.
To get started with @ctiveLink
1
Install AAA batteries into the module (
) and charge the @ctiveLink
module backup battery (
).
2
Turn the module on (
3
Insert the module into the handheld computer (
). The module
automatically opens the @ctiveLink main screen and checks for stored
messages to transmit.
4
Use the stylus to tap the screen to perform actions such as opening your
two-way messages. Turn to
for an introduction to handling two-way
messages.
Use the stylus to create messages. Refer to the handheld computer guides to
learn how to create text on the screen.
5
Tap the home icon to return to the handheld computer home screen.
