Page 13
60cm - ICC6GE3 & 90cm - CC96GB Ceramic Cooktops
Using the Timer
You can use the timer in two different ways:
You can use it as a
minute minder.
In this case, the timer
WILL NOT
turn any
cooking zone off when the set time has been reached. The second way is to set
a
cut-off timer
where the cooking zone
WILL TURN OFF
when the time set is
reached. The maximum time that can be set is 99 minutes and can be used on
several zones at the the same time.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on and zone selection key is not activated
(zone indication ‘-‘ is not blinking).
Note: you can set minute minder before or after cooking zone power setting
finished.
2. Touch timer key, “00” will show in the timer display and
“0” will blink.
3. Set the time by touching the “+” or “-” controls of the timer (e.g. 5)
4. Touch timer control again, then “0” will flash.
5. Set the time by touching the “+” or “-”, now the timer you set is 95 minutes.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.