Glen Dimplex CC96GB Instruction And Installation Manual Download Page 11

60cm - ICC6GE3 & 90cm - CC96GB Ceramic Cooktops  

Page 8 

Product Overview – ICC6GE3 & CC96GB

 

 

                        

The Control Panel

1. ON/OFF switch               2. Select power level              3. Setting the timer
4. Child lock                        5. Select heating zone            6. Double zone control

ICC6GE3

CC96GB

Before using your new Cooktop

                              

• Read this guide, taking special note of the ‘Safety Warnings’ section.

• Remove any protective film that may still be on your Induction cooktop.

• DO NOT use the cooktop if cracked or damaged in any way.

Using the Touch Controls

                                                     

• The controls respond to touch, so you don’t need to apply any pressure.

• Use the ball of your finger, not its tip. See illustration.

• You will hear a beep each time a touch is registered.

• Make sure the controls are always clean, dry, and that there is no object (e.g. 
a utensil or a cloth) covering them. Even a thin film of water may make the 
controls difficult to operate.

Summary of Contents for CC96GB





























Reviews: