60cm - ICC6GE3 & 90cm - CC96GB Ceramic Cooktops
Page 10
Using your cooktop
To start cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the cooktop has entered the state of standby mode.
1. Touch the ON/OFF
switch. all the indicators show “– “
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking
zone is clean and dry.
3. Touch the desired heating zone selection control, an indicator
next to the key will flash.
4. Select a heat setting by touching the “+” or “-” controls.
• If you don’t choose a heat setting within 1 minute, the Induction
cooktop will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1. Touch the desired heating zone selection that you wish to switch
off.
2. Turn the cooking zone off by touching “+” or “-” control to “0”.
Make sure the display shows “0”.
3. Turn the whole cooktop off by touching the ON/OFF control.
