Glem EFC64MEI, Installation And Instruction Manual, Page: 32 / 33

32
32
INSTALLERS CHECK LIST
You must test the oven after installation before you hand it over to the customer. On gas
ovens you must have a manometer and a connecting tube to check that the gas pressure is
correct.
The following checks must be made to commission the oven and to activate the warranty. If
this form is not completed fully and correctly it will void the warranty.
INSTALLATION CHECK
GAS OVENS
1. Has a leak test been completed using soapy water? YES NO
2. Is the gas regulator set for the correct gas type and pressure? YES NO
3. Is the jet correct for the type of gas being used? YES NO
4. Does the gas burner light and stay lit after reaching temperature? YES NO
5. Is the flame blue and appropriately sized? YES NO
ALL OVENS
1. Have the supplied installation components been used? YES NO
2. Is the oven earthed and wiring polarity correct? YES NO
3. Has the power cable been checked so it is not touching the oven? YES NO
4. Is the door closing correctly and the shelves correctly installed? YES NO
5. Does the customer understand how to operate the oven? YES NO
6. Has the oven been operated and seen to be reaching temperature? YES NO
Model Number
Date of Installation
Name of Installer
Licence number
Installers Signature:
Owner’s Signature confirming the above:
GLEM GAS AUSTRALASIA PTY. LTD.
P.O. Box 63 Blaxcell PO South Granville NSW 2142
Phone: 02 9721 2755 – Fax: 02 9721 2766 –
www.glemgas.com.au
Email us info@glemgas.com.au
Free call 1 300 307 917