background image

2

on the environment. Do not puncture any part of the refrigerant circuit.
•  If the appliance is installed, operated or stored in a nonventilated 
area, the room must be designed to prevent to the accumulation of 
refrigerant leaks resulting in a risk of fire or explosion due to ignition of 
the refrigerant caused by electric heaters, stoves, or other sources of 

ignition.

•  The appliance must be stored in such a way as to prevent 

mechanical failure.

•  Individuals who operate or work on the refrigerant circuit must have 
the appropriate certification issued by an accredited organization that 
ensures competence in handling refrigerants according to a specific 
evaluation recognized by associations in the industry.
•  Repairs must be performed based on the recommendation from 

the manufacturing company. Maintenance and repairs that require 

the assistance of other qualified personnel must be performed under 
the supervision of an individual specified in the use of flammable 

refrigerants.

1. The appliance is for indoor use only. 
2. Do not use the unit on a socket under repairs or not installed properly
3. Do not use the unit, follow these precautions: 

A: Near to source of fire. 

B: An area where oil is likely to splash.
C: An area exposed to direct sunlight.  
D: An area where water is likely to splash. 
E: Near a bath, a laundry, a shower or a swimming pool. 

4. Never insert your fingers, rods into the air outlet. Take special care to warn 

children of these dangers. 

5. Keep the unit upward while transport and storage, for the compressor 

locates properly. 

6. Before cleaning the air-conditioner, always turn off or disconnect the 

power supply. 

7. When moving the air-conditioner, always turn off and disconnect the 

power supply, and move it slowly. 

8. To avoid the possibility of fire disaster, the air-conditioner shall not be 

covered. 

9. All the air-conditioner sockets must comply with the local electric safety 

requirements. If necessary, please check it for the requirements.

10. Children should be supervised to ensure that they do not play with the 

Summary of Contents for Silence S20
























Reviews: