20
TrOUBlesHOOTInG
Don’t repair or disassemble the unit by yourself, unsuitable repair may
make the quality-protected card in vain, and even cause damage to the
user or his/her possession.
PrOBleMs caUse sOlUTIOn
“1. The unit does not turn on when you press the Power button.”
“Power cord is not plugged.
Water full indicator lamp blinks.
Room temperature is higher or lower than the adjusted temperature.”
“Insert the plug into the socket and turn on the unit.
Empty the water tank.
Reset the temperature adjustment.”
2. The unit does not cool properly.
“Windows and doors are open.
Another heat source in the room.
Exhaust hose is disconnected or blocked.
The adjusted temperature is too high.
Air inlet is blocked by smth.“
“Close all windows and doors.
Remove the heat source.
Connect or clean exhaust hose.
Reset temperature adjustment, set the desirable temperature (16° C-31° C)
Clean the blocked place.“
3. The unit switches off automatically.
Overheat protection (the unit switches off automatically when the
temperature at the air outlet exceeds 70° C).
Restart the unit and adjust lower temperature.
4. Noise
“The unit is not on a flat surface. You hear refrigerant flowing.“
“Place the unit on a hard flat surface (reduces noise). That is normal”
5. E0 error
This error message indicates too high ambient temperature. Please
observe the instructions for the optimal operation of your SILENCE unit. It
can also be a temporary error measurement between the input and the
