.
Stock No. C000/1033 - DWG No. 02B-088-23 Issue 1 - May 2018
AND SIGNMASTER ULTRA, DURAPOL AND IMPACTAPOL ARE TRADEMARKS OR REGISTERED
TRADEMARKS OF GLASDON GROUP OR ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES.
A planned maintenance schedule or regular inspection is recommended, replacing
components as necessary.
Replacement components are available direct from GLASDON.
GLASDON cannot be held responsible for claims arising from incorrect installation,
unauthorised modifications or misuse of the product.
© Copyright 05/2018
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
4 of 4
IMPORTANT NOTE: PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND THAT A
COPY IS GIVEN TO STAFF INVOLVED WITH THE INSTALLATION AND MAINTENANCE OF THIS PRODUCT.
SAFETY NOTE: PLEASE REFER TO ‘THE MANUAL HANDLING OPERATIONS REGULATIONS 1992’ DURING HANDLING.
Remove the existing Cover Caps (Item 6) using a flat-headed
screwdriver to prise them off the fixings.
BASE / BOLLARD REMOVAL
Use a 6mm Allen Key (one is supplied with the Bollard) to
untighten the ground fixing Screws. Remove the Bollard
and fixings. Retain the fixings if replacement fixings are not
required.
Install the new Bollard referring to the
Bollard Installation
instructions on Page 1 of this booklet. If installing a spare
Base as a replacement - first fit the Bollard Body to the Base as
shown in the steps on Page 3.
1.
2.
CLEANING AND MAINTENANCE
Hand wash with a 10% solution of mild detergent in warm water using a soft bristle brush followed by a rinse with clean water.
CAUTION:
Many graffiti removers, including Glasdon Graffitix graffiti wipes can damage stickers.
Use only on the areas of the Impactapol or Durapol affected and do not use on retroreflective panels or sign face.
Felt tip pen or paint may be removed from Impactapol and Durapol using a proprietary graffiti remover such as Glasdon Graffitix graffiti
wipes. Carefully follow the instructions, particularly the guidelines covering safety and protective equipment during use. Ensure that all
traces of chemicals are removed once the graffiti has been erased, then clean as detailed above.
Regular inspection is recommended and components replaced when necessary.
