E.
ITEM 21
The Upper Handle (ITEM 21 - 2 off) can
be fitted in three positions on along
the Handle Shaft (ITEM 18).
Select the most comfortable position
for use. Should either of the two higher
positions be chosen, fit the Handle
Spacer (ITEM 22) in the top fixing hole
of the Upper Handles with M6 x 50mm
bolt (ITEM 20), 6mm Flat Washer (ITEM
23) and M6 Lock Nut (ITEM 9).
Take the Gauge and Lever Assembly
(ITEM 24) and align the holes with
the holes in the Upper Handles and
Handle Shaft.
Ensure the Gauge and Lever Assembly
is on the right hand side and the
Handle Lever is facing forward.
Secure in position using M6 x 50mm
Bolt (2 off), 6mm Flat Washer (2 off)
and M6 Lock Nut (2 off).
ITEM 18
ITEM 9
ITEM 23
ITEM 22
ITEM 24
ITEM 20
ITEM 25
ITEM 26
ITEM 27
ITEM 9
Position the Hopper (ITEM 25)
onto the Hopper Frame (ITEM 7)
and align the four holes.
Ensure the vertical shaft of the
Gearbox and Axle Assembly
(ITEM 2) is located in the hole in
the base of the Hopper.
Secure in position using M6 x
45mm Bolt (ITEM 26 - 4 off), Large
6mm Washer (ITEM 27 - 4 off) and
M6 Lock Nut (ITEM 9 - 4 off).
ITEM 7
F.
