11
Section 1 - Installation: Equipment Assembly
9.
Continue adding extra hose lengths if necessary.
The GlasCraft System is factory assembled. If
any questions arise concerning air or electrical
connections, please refer to illustrations located in
the forward portion of this User Manual or contact
your GlasCraft distributor.
Required Tools:
Opened - end wrenches - 5/8in., 3/4 in., 13/16 in.
a.
Lay hoses out straight.
b.
Couple hoses together with supplied union fittings
and tighten finger-tight.
c.
•
Hold crimp fitting hex (3/4 in.), and union fitting
together, allowing the hose to hold it’s natural line.
•
Using the appropriate wrench (A-side 3/4 in. /
B-side 13/16 in.) tighten swivel fitting to union, not
allowing crimp fitting or union to turn. Repeat on
opposite side of union.
This practice is required on all connection
points.
1) Hose @ machine
2) Hose @ gun
3) Adding additional hose sections
d.
Attach the yellow power plugs.
e.
Attach the thermocouple
extension cable. p/n GC0885.
GC0705 Extension hose
Machine End
Machine End
GC0393 Standard hose
Gun End
Summary of Contents for Guardian A5-6000 IP
Page 26: ...24 Section 3 General Information Assembly Drawings GC1751 Generic System Schematic...
Page 27: ...GC1751 System Schematic 220V Single Phase 25 Section 3 General Information Assembly Drawings...
Page 37: ...Section 4 Safety Information Notes 35...
