EnSet
©
Plus / Original / Compact
Version 03 - 15.10.2018
28/40
6.3
Stroke Length Adjustment
The EnSet
©
tool allows the user to choose the stroke length of each impact by
adjusting where the striker head impacts the collet. It can barely tap the back of
the collet for light, fine work or it can impact the collet fully for much more power
in each stroke.
6.4
Basic Stroke Length Adjustment
No.
Description
(A)
Install graver
(18)
into collet
(20)
, tighten collet setscrew
(19)
.
(B)
Insert collet with graver into handpiece barrel
(22)
. Rotate collet until detent
ball « clicks » into position. You will feel that there is resistance to rotating the
collet once it is set in position.
To remove collet: twist collet/graver until detent ball releases from lock
position and remove from handpiece sleeve.
(C)
While holding collet/graver - step on foot pedal to actuate machine.
(D)
While handpiece is striking, turn knurled ring
(21)
to the left until you can hear
that the striker head is not directly impacting the back of the collet. You will
hear and feel that the striker head does not have a crisp hit on the collet as
you turn the knurled ring to the left.
(E)
Keep machine on so that the striker head is active.
(F)
While the machine is working, slowly turn knurled ring
(21)
to the right. Listen
to the sound and pay attention to the feel of the tool in your hand. Keep
turning the ring until you hear crisp taps on the back of the collet. This is
where the striker head starts to come into direct contact with the back of the
collet.
For a longer stroke with more power: turn ring more to right.
For a shorter stroke with less power: turn ring to left.
If you turn the ring too much to the left so the collet is not impacted, then the
tool will not function efficiently.
You can re-adjust stroke length at any time depending on the power or
character of the cut you wish to make:
- Shorter strokes = less pronounced progress marks, less power/impact;
- Longer strokes = more pronounced progress marks, more power/impact.
Summary of Contents for EnSet Compact
