Glamox Vertex PN8100102 Operation And Maintenace Manual Download | Manualshive

Page: 7 / 56

background image

The dates of automatically triggered functional and autonomy tests shall be programmed in the control
application in the

“Calendar” scree according to the section

6. Programming the emergency lighting

system

.

After each check or repair of luminaires, it is recommended to run a manually triggered test.
A report is generated for each manually or automatically triggered test.
According to PN-EN 50172, the reports from the automatic testing device shall be available as
printouts.

BATTERY FORMATTING

The batteries in the emergency luminaires shall be formatted once a year (it is recommended to format
6 months after the battery autonomy test). Automatic battery formatting can be programmed in the
control application according to the section

6. Programming the emergency lighting system.

Failure

to format the batteries may result in warranty becoming null and void.

REPAIR AND REPLACEMENT

Note!

For  the  correct  operation  of  the  system,  damaged  devices  shall  be  replaced  only  with  the  devices
manufactured by ES-SYSTEM.
Third-party devices can be connected to the system after ES-SYSTEM consent.
In case of emergency luminaires, after a repair or replacement the correct operation shall be verified
by  means  of  a  manually  triggered  functional  test  according  to  Section

6. Programming the

emergency lighting system

.

MAINTENANCE

VERTEX devices do not require any special maintenance. Remove dust and other dirt using a dry
cloth. In case of high dust content it is recommended to blow the control unit interior with compressed
air. Do not use chemicals.

Note!

Any maintenance operations can be performed only when the control unit is disconnected from the
mains. In case of Alterations in the control unit power supply system, measurements shall be taken
adequate to the measurement of cabinets.

In addition to tests conforming to PN - EN 50172, the routine maintenance includes:

•

analysis of test reports;

•

current troubleshooting;

•

analysis of the battery formatting report;

•

system software update.

Pursuant to the Regulation of the Minister of Interior and Administration of 7 June 2010, technical
inspection and maintenance shall be performed in intervals specified by the manufacturer, at least
once a year.
ES-SYSTEM provides warranty and post-warranty service performed by qualified service personnel.

DISPOSAL OF DEVIC ES AND PACKAGING

ES-SYSTEM  luminaires  and  electronic  devices  do  not  contain  hazardous  substances  defined  by  the
RoHS Directive 2008/35/CE.
ES-SYSTEM is a signatory of the agreement for recycling of luminaires and electronic devices.
The packagings shall be sorted by size, type and material.

7

«
...
5
6
7
8
9
...
»

Summary of Contents for Vertex PN8100102

























































Reviews:

No comments

Related manuals for Vertex PN8100102

Brand: Eaton Pages: 6

Brand: Bartlett Pages: 5

Brand: Salda Pages: 20

Brand: Saga Pages: 9

Brand: Magnescale Pages: 3

Brand: National Instruments Pages: 6

Brand: National Instruments Pages: 6

1E0671-1 MCR2.9

Brand: Haberl Electronic Pages: 9

Brand: J+J Pages: 2

Brand: Eaton Pages: 448

Brand: Eaton Pages: 57

Brand: Parker Pages: 4

Brand: Riello Pages: 72

Brand: National Instruments Pages: 26

Entelli-Switch 250

Brand: GE Pages: 32

Brand: Eaton Pages: 2

Brand: Audioplex Pages: 1

Alano FlipIt 1760447

Brand: Graco Pages: 136

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands