START SCREEN
After starting the application, a recommendation is displayed to turn off data transmission on the
phone. The "Selected interfaces" section shows the available interfaces (no action required).
SEARCH FOR ACTIVE CONTROL UNITS
The search for VERTEX units in the system starts automatically when you go to
the “Searching”
screen.
After the search, the results are presented as a list.
Important!
Before going to the “Grouping” screen, make sure all control units have been found. If the number of
found VERTEX control units does not tally, verify the power supply and network infrastructure of all
control units. If you find errors in control units
– reboot the indicated units by powering them down for a
moment. If the problem persists, contact the ES-SYSTEM service.
23
