7
LOG-SET / CRYSTAL EMBER INSTALLATION
OPERATION
A. Glass front must be removed and the appliance must be
mounted in its final location before the log-set / crystal /
embers are installed.
B. If your fireplace come with log-set, take the log-set out of
the package and put it to the fireplace media slot (Figure 1).
C. To switch to Crystals, firstly take the Log-set out of the
fireplace slot, then Place the plastic tray (J) to the fireplace
designed place.Then carefully place crystal embers into the
plastic tray as illustrated. Apply an even layer from side to
side (Figure 2, Figure 3). You can also use both log-set and
crystal embers.
NOTE: Please make the installation according to the embers which you bought.
Figure 1
Figure 2
Figure 3. (Crystal medias)
Read and understand this entire owner’s manual, including all safety information, BEFORE plugging
in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death.
WARNING
POWER
Plug the power cord into a AC110-120
Volt outlet (see IMPORTANT SAFETY
INFORMATION on page 3). Make
sure the outlet is in good condition
and that the plug is not loose. NEVER
exceed the maximum amperage
for the circuit. DO NOT plug other
appliances into the samecircuit.
METHODS OF OPERATION
This electric fireplace can be operated by
the CONTROL PANEL/TOUCH PANEL,
or by the battery powered REMOTE
CONTROL. The operation and functions
of the two methods are the same.
Before operating, please review the
IMPORTANT SAFETY INFORMATION
on page 3, and heed all warnings.
