8
REMOTE CONTROL OPERATION
POWER ON/OFF
TIMER
FLAME
HEATER
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
FLAME button: Makes flame effect dimmer
and brighter.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for
fireplace to turn on.
HEATER button: Turns heater on and off.
NOTE: The heater only works when the flame effect is on. If the flame effect is off, the heater will not turn on.
NOTE: To prevent overheating, the heater blows cool air for 10 seconds.
TIMER button:
Controls timer settings to turn off fireplace at
selected time. Settings range from 1 hours to
9 hours.
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Unit goes to standby. All functions turn off.
1. Press once. Flame brightness effect gets
changing.
2. Press again. Until desired setting is reached.
1. Press once. Indicator light turns on.
Timer is set to 1 hours.
2. Press again until desired setting is reached.
Indicator lights show setting.
POWER
TIMER
FLAME
HEATER
BUTTON
FUNCTION
ICONS
ACTION & INDICATION
When the heater is first turned on, a slight odor may be present. This is normal and should not occur again unless
the heater is not used for a long period oftime.
To improve operation, aim the remote control at the front of the fireplace. DO NOT press the buttons too quickly.
Give the unit time to respond to eachcommand.
NOTICE
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control.
Should the heater reach an unsafe temperature, the heater
will automatically turn OFF. TO RESET:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
Wait 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked,
or clogged with dust or lint. If they are, use a vacuum to
clean the vent areas.
4. With the POWER switch in the OFF position, plug the
power cord back into the outlet.
5. If the problem continues, have your outlet and wiring
inspected by a professional.
REMOTE CONTROL BATTERY INFORMATION
This remote control uses 2 AAA batteries (not included).
NEVER dispose of batteries in fire.
Failure to observe this precaution
may result in an explosion. Dispose
of batteries at your local hazardous
material processing center.
!
