1
.
INTRODUCTION
1
2
Thank you for choosing Meiling's bio-medical products.Read this manual
carefully before using the appliance and follow the instructions for the safety
operation.Keep this manual in an adequate place to refer to it as necessary.
Meiling never guarantee any safety if the appliance is used for any objects other
than intended use or used by any procedures other than those mentioned in this
manual.The contents of the manual will be subjected to change without notice due
to the improvement of performance or functions.Contact Meiling sales
representative or agent if any point in this manual is unclear or if there are any
inaccuracies.No part of this manual may be reproduced in any form without the
expressed written permission of Meiling.
u
Please read the page4-page7 carefully as it contains the important safety
notices.
u
Only trained or authorized personnel could operate this Ultra-low temperature
freezer.
u
Only qualified service personnel or authorized agent could install and
maintenance this device.
u
Use Meiling spare parts as always. If users want to use other accessories,
Meiling bio-medical will not be responsible for the adverse consequences.
However users could apply for verifying the eligibility of these accessories from
Meiling before use them.
u
Should inspect and maintenance the device in a specified time interval.
u
Due to the differences between each models and the improvements of products,
actual product may differ from the diagram. Please refer to the final product.
u
Everyone has an obligation to be responsible for his or her own safety.
u
Put on dry gloves when you take out refrigerated articles from the freezer.
u
contents or the inside walls with naked hands may cause frostbit.
Handing frozen.
u
contents or the inside walls with naked hands may cause frostbit.
2. Safety
Notices
For the first time to use this device, uses must read the meaning of the following warning labels
very carefully. Items and procedures are described so that you can use this unit correctly and safely.
If the precautions advised are followed, this will prevent possible injury to the user and any other
person.
CAUTION.
Failure to observe WARNING signs could result in injury to
personnel and damage to the unit and associated property.
WARNING
：
Failure to observe WARNING signs could result in a hazard to
personnel possibly resulting in serious injury or death.
WARNING.
Failure to observe WARNING signs could result in a hazard to personnel possibly resulting in serious injury
or death.
As with any equipment that uses CO2 gas, there is a likelihood of oxygen depletion in the vicinity of the
equipment.It is important that you assess the work site to ensure there is suitable and sufficientventilation.If
restricted ventilation is suspected, then other methods of ensuring asafe environment mustbe considered.
These may include atmosphere monitoring and warning devices.
CAUTION HOT.
The sign inform the users about the danger of burns for high
temperature.
DANGER OF EXPLOSION
The sign inform the danger of the application of volatile,
explosive chemical substances.
NO TILTING .
STAY
OUT
OF
SUN
.
Do not touch any electrical parts such as the power supply plug or any switches with a wet hand.This may
cause electric shock.
Only qualified engineers or service personnel should install the unit.
The installation by unqualified personnel may cause electric shock or fire.
Be sure to install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not
adequate, this may result in injury from the unit falling or tipping over
Carefully with the power cord to avoid short circuit or open circuit.When removing the plug from the power
supply outlet, grip the power supply plug, not the cord.Pulling the cord may result in electric shock or fire by
short circuit. Don't make the power line pack and pressed by furnish or heavy goods.Also please don't close
to the compressor and heat source.
Please insert the power plug firmly to avoid leakage.
Use a power supply outlet with ground (earth) to prevent electric shock. If the power supply outlet is not
grounded, it will be necessary to install a ground by qualified engineers.
Don't lengthen the line randomly. If you need, To use 2.5mm2 copper line,you should keep 4mm2 line to
connect the electrical outlet. Or may cause fire.
Make sure a dedicated power source is used as indicated on the rating label attached to the unit. Out of the
rate, should install a property transformer and a proper voltage stabilizer for securely operation. Or the
freezer may be damaged, and may cause injury.
Be sure to installthe unit on a sturdy floor, no shaking and tilting.
Never install the unit in a flammable or volatile location. This may cause explosion or fire.
Never install the unit in a humid place or outdoor or a place where it is likely to be basked
straightly.Deterioration of the insulation may result which could cause current leakage or electric shock.
Do not place the devicelateral tilt, do not impact the device; the device is equipped with refrigeration
systems, roll or shock will easily damage the freezer.
