background image

Your new toilet is made of stain-, acid- and abrasion-resistant vitreous china.  Clean the outside surface 

with mild soap, warm water and a soft cloth. On stubborn stains use a powdered detergent and damp 

sponge or nylon scouring pad. Never use abrasive scouring powders, cleansers or pads because they will 

scratch, damage and dull the surface. WARNING: DO NOT USE IN-TANK CLEANERS. Products 

containing chlorine (calcium hypochlorite) can seriously damage tank fittings potentially causing leaks, 

excessive water use and property damage. The manufacturer shall not be responsible or liable for any tank 

fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).
When cleaning your toilet seat, wash it with mild soapy water. Rinse seat thoroughly with clean water and 

dry with a soft cloth. Avoid detergents, disinfectants or cleaning products in aerosol cans. NEVER use 

abrasive scouring powders on your seat. Some bathroom chemicals and cosmetics may cause damage to 

the seat’s finish, so test your cleaning solution on an inconspicuous area before applying to the entire 

surface.

CARE AND MAINTENANCE

The manufacturer provides a LIMITED LIFETIME WARRANTY for its vitreous china plumbing fixtures 

to be free of manufacturing defects in material and workmanship. This warranty is not transferable.
The manufacturer, at its election, may repair, replace or make appropriate adjustments where inspection 

discloses any such defects occurring in normal usage.
No warranty is given for installation mistakes, water damage or misuse. For a long-lasting finish, take care 

in maintaining the product.
The manufacturer’s obligation shall be limited to such repair and or replacement. Purchaser shall be 

responsible for all shipping charges for returned product. This warranty gives you specific legal rights, and 

you may have other rights that vary from state to state.
To obtain warranty service, contact 1-800-831-8383.

LIMITED LIFETIME WARRANTY

Printed in China

7

Summary of Contents for N2428R-DF TBD

















Reviews: