7 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
7
Tub ledge installation
WARNING:
Injury may occur if you do not install the top
of the assembly onto the ceiling first.
NOTE:
For shower stall Installation see step 8.
□
Lift the entire assembly into position over the tub ledge.
□
Compress the top of the unit against the ceiling at the
desired location.
□
Move the bottom end into place on the tub ledge so that the
unit is in a vertical position.
□
Place the tape strips (EE) around the seams of the tubes.
6
Preparing the bottom shelf assembly
for tub ledge installation
NOTE:
For shower stall preparation see step 8.
□
Place the soft vinyl end cap (DD) on the bottom of
the assembly tube (C).
5
Inserting the 1/2 in. tube into the
straight tube
□
Place the 1/2 in. tube (A) into the open end of the straight tube
(with spring packed inside) (B).
□
Slide the end cap with hole (CC) over the straight tube (B).
B
CC
A
B
DD
bottom shelf assembly
EE
the entire assembly
