GL-INET Convexa-B User Manual Download Page 140

Page: 140 / 156

Page 136 | 152

3. Press and hold the Reset button firmly first, and then power on your device.

(If your device does not have a power button, plugging it in will power it on
automatically.)

If you can not find the reset button, please refer to our page,

How to Repair

and Reset

Release your finger when you see the LED has flashed:

4. The Power LED will light up. Then, other LEDs will start flashing.

•

6 times

for GL-MiFi, and then the LTE light will faintly flash twice.

•

5 times

for GL-AR150, GL-AR300M, GL-USB150, GL-AR750, GL-

AR750S-Ext (Slate), GL-X750-Ext (Spitz), GL-MT300N-V2, GL-E750
(Mudi).

•

4 times

for GL-S1300, GL-B1300.

The leftmost LED may stay on the whole time while the rightmost LED
flashes 4 times, then the middle LED turns on and stays on.

(For some old GL-B1300, the leftmost LED stays on the whole time, and
both the middle LED and the rightmost LED flash 5 times at the same
time then they stay on.)

•

3 times

for GL-MT300N, GL-MT300A.

•

No repeat LED flashes signal

for GL-MV1000.

(Power and WAN LEDs will stay on the whole time.)

Set your computer’s IP address to

192.168.1.2

. Please check the step-by-

step guide for different operating systems below:

Windows 7 / Windows 10Mac

Summary of Contents for Convexa-B





























































































































































Search results

Summary of Contents for Convexa-B

Reviews:

Related manuals for Convexa-B

Brands by name

Popular brands

GL-INET Convexa-B, User Manual

Search results

Summary of Contents for Convexa-B

Reviews:

Related manuals for Convexa-B

Brands by name

Popular brands