M1000002 V1.2 - 11/2021
www.gkdtechnologies.com
4
1 INTRODUCTION
This manual contains the installation and set-up instructions for the Series 1-L Total Moment
Indicator.
Installation should only be carried out by competent and trained staff as this product is a
safety product.
During installation it is assumed that industry standards will be observed and all cabling will
be protected against damage either from the movement of the machine or from collisions
that may occur during
normal operations (trees & branches, etc.)
All welding or bare metalwork should be treated to ensure that rust does not form.
1.1
System Layout
The system layout depends on which version of the Series 1-L is being installed.
•
For the series 1 system layout, refer to page 9.
•
For the series 2 system layout, refer to page 10.