GKB HZ2001 HD-SDI PTZ Camera
21
Some application examples of controls are shown in detail below.
Using the joystick
A command can also be given simply by moving the joystick because this generates actions on
the camera or OSD (On Screen Display) menu.
Using a single key
Pressing a single key can cause camera action. For example, the following command will zoom
out of the frame. Underling indicates the key is in use.
ZOOM OUT
Key combinations
Pressing a key combination in rapid sequence extents the command set. For example, the
following command (select camera address 1) is performed by pressing the following keys:
CAM
+
1
+
ENTER
3.2.3 Control Keypad Command Types
There are four command types:
!
Select camera,
!
Move camera (tilt and pan, zoom, adjust focus and IRIS opening, go to preset positions),
!
Adjust camera operation mode using menus,
!
Various quick controls operable from the control panel.
The method for accessing these controls will be shown in detail in the following paragraphs.
3.3 Select A Camera
The camera to be controlled must be selected first. For example, the following command selects
camera 1:
CAM
+
1
+
ENTER
After this operation, the message
CAM 1
will appear on the control panel display.
