GKB HZ2001 HD-SDI PTZ Camera
19
3. Operation Guide
3.1 Operation At Power Up
The camera employs the default settings the first time it is switched on. Changes to the settings will
be permanently stored and will be made available the next time the camera is switched on. You
can return to the default settings by means of the appropriate menu option at any time.
The camera will work as follows when it is switched on.
The camera will run a calibration procedure and a message showing the following information
will appear on the video output OSD (On Screen Display): protocol, communication parameters,
camera address and software version.
Check that the data are suitable for operation. Otherwise, refer to the section in this document that
shows how to install the camera correctly.
At the end of the calibration step, the camera will switch to stand-by as programmed (
POWER UP
ACTION
in
DOME SETTINGS1 > POWER UP
). The camera will continue working this way until any
command is received from controller. The camera during this phase can be pointed to a fixed
point or pan across the field. Refer to the detailed described in the
POWER UP ACTION
menu
section for more details.
PTOL: PELCO-‐D
COMM: 2400, N, 8, 1
ADDR: 1
SOFTWARE VERSION V1.0.1
