14
Care & Cleaning
■ Care & Cleaning
Always clean the plastic parts wet or damp but never dry.
Any product used to clean or disinfect your GK bath must be free
from any abrasive, alcohol & corrosive ingredients. Never use any
kind of customary glass cleansers, solvents (e.g. acetone) or
similar detergents or dilutions. Never use harsh or pointed uten-
sils, e.g. rough clothes, scrubbing sponges, scouring pads or any
tools. If you are in any doubt about your usual cleaning products
please contact your GK representative before use.
Caution:
Any damage caused by unapproved / unsuitable products
will not be covered by the manufacturer’s warranty.
Dark grey and transparent plastic parts:
The dark grey and transparent plastic parts may only be cleaned
with a maximum of lukewarm water and, if needed, a mild dishwash-
ing soap. We especially recommend our special plastics intensive
cleanser (details on request). For these parts of the tub
only use
very fine textured chamois leather or a microfiber cloth.
For the best care for these parts we recommend our special anti-
static plastics care product (details on request).
Remaining tub body parts:
For the other mostly white parts, after use always rinse the bath
tub thoroughly with the shower hose. Any dirt which adheres to the
bathtub surfaces must be removed with a soft sponge or cloth and,
if necessary, customary detergents (besides the above mentioned
restrictions).
We recommend using our approved shampoo and bath additive products
with your GK bath
.
Other products may cause more persistent dirt
being harder to clean.
We also recommend for you to polish the white bath tub body once a
month with car polish cream.
This will give the bathtub a smooth,
water repellent surface and will make routine cleaning considera-
bly easier – it will also enhance the appearance of your GK bath.
Summary of Contents for GK Magic 100
Page 1: ......
