-6-
Floodlights also emit haze ripple. When
installing floodlights to provided movement
activated lighting, position the floodlights at the
side or above the detector. A minimum of 60cm
(2 feet) is recommended, provided the detector
is not in direct radiated hear from floodlight.
Once alignment is completed, check that the
vent hole to the front cover is positioned at the
bottom. Also ensure that both sides of the outer
casing are engaged before pressing the cover
firmly to securely locate it.
IMPORTANT
Ensure the detector is mounted upright on a
vertical surface. If mounting the detector on a
conductive or uneven surface it is advisable to
use the mounting spacer provided.
This will ensure that the aerial is above the 4mm
clearance distance required from the surface to
optimise the transmission range.
