10/06/2008
M042.E
GQ
•
59
¥
72
100 ORIGINS OF THE AXES
This function can be used (in the
ABSOLUTE
counting mode) to store up to 100 work
starting positions (origin 0-99). These origins are related to the
REF
of the scales and
can always be traced, even after a power outage.
Let us suppose that several origin points have to be set and stored.
Switch the counting system to ABSOLUTE (See. Page 16).
Make a search for rEF and position the Carriages on the first work origin:
Key
1
O r G 1
X
and enter the chosen origin number (for example 1).
To recall previously stored origin points, proceed as follows:
Key
1
O r G 1
X
and position the Carriages at dimension 0,00 and continue machining.
In the event of a power failure, search rEF and continue as above.
