10/06/2008
M042.E
GQ
•
39
¥
72
F 54
CALCULATING ANGULAR SPEED
This function is used for calculating the angular speed, once it is given the diameter of the
workpiece and the tip speed expressed in m/min.
Let us suppose, for example, that we wish to activate this function. Proceed as follows:
Key
54
ENTER SPEED VALUE
VISION 700
You will be prompted to enter the cutting speed in m/min recommended by the tool
manufacturer.
For example 70 m/min.
Key
70
ENTER DIAMETER
VALUE
VISION 700
You will be prompted to enter the turning diameter to be performed. For example, 100
mm.
Key
100
SPEED (rpm)
222.817
222.817 is the result of the theoretical calculation made by the tool. The operator
may choose the rotation speed of the spindle considering the mode in which the tool
has been set to operate:
INDEFINITE :
It will select the closest available rotation speed to the calculated
theoretical one.
CONTINUOUS : As above, with the exception of the speeds lower or higher than
those allowed (the tool indicates the limit values).
DISCRETE :
The tool will indicate the closest one to the theoretical
calculation, selecting it from all available previously set speeds.
NOTE:
For details on setting the tool in INDEFINITE / CONTINUOUS or
DISCRETE mode, see function
F 98718.
Press
key to return to the tool normal
operating mode.
DIGITAL READOUT
VISION 700
NOTE : This function is available only in Vision LCD version.
