10/06/2008
M042.E
GQ
•
50
¥
72
Move X and Y axes up to the point X = 0.00 e Y = 0.00 (point 3) and drill the third hole.
press
To recall the position of X and
Y in memory no. 13
0. 0 0
®
X
-
3 0. 0 0
®
Y
Move X and Y axes up to the point X = 0.00 e Y = 0,00 (point 4) and drill the fourth
hole.
To return to one of the previous holes (ex. from the position 4 to the position 3) :
press
To recall the position of X and
Y in memory no. 12
0. 0 0
®
X
-
3 0. 0 0
®
Y
In order to repeat the same machining operation again, place a new workpiece:
press
Axes show the distance to
reach point 1
5 0. 0 0
®
X
0. 0 0
®
Y
Move X and Y axes up to the point X = 0.00 e Y = 0.00 (point 1) and drill the first hole.
Go ahead with the following drills for all workpieces.
After completing the workpieces:
Press
To quit the function
1 2 3. 4 5
X
NOTES
:
1. It is possible to store memory blocks from 0 to 999.
2. In order to modify memory blocks, enter new positions when
programming.
3. It is not allowed to enter memory blocks inside a working program. If
necessary, store it again starting from a memory block not used yet.
4. It is not possible to eliminate all the blocks of a complete program. If
necessary, use those blocks for storing a new program.
