Edit mode
25
Code no. 576074
Rev. nº 03/0418
5. EDIT MODE
5.1. Defining editing concepts
Before accessing program editing, it is important to be familiar with the main concepts involved in this process.
Function
: Each of the actions performed by the dryer during a program. The functions are always performed
following the same sequence or order of execution.
Stage
: The grouping of the functions into the order in which they are to be performed is defined as a stage. In a
drying program there are basically two stages: the drying stage and the cooling stage.
EASY
operation.
In
EASY
operating mode the drying stage always consists of a single PHASE.
PRO
operation. In
PRO
operating mode, the drying stage may consist of different PHASES up to a maximum of
nine. A
PHASE
can be understood as the sequential repetition of certain functions.
Program
: The combination of the drying and cooling stages, whose aim is to dry the fabrics involved.
Edit
: Managing the programs.
Editing options:
Creating a new program
Modifying an existing program
Copying an existing program into a new program. The preset programs can be copied.
Deleting a program created by the user.
It is important to note that Programs 41 to 50 are factory set. The contents of these programs cannot be
changed or deleted. Only the program name can be modified.
Configuration:
The SYSTEM TOOLS (Chapter 6) mode groups together the settings that affect the operation
of the dryer. Modifying the value of these settings allows the operation of the dryer to be adapted to the needs of
the users while using the machine’s possibilities to the maximum.
The dryer leaves the factory with the basic configuration of operation options.
This configuration allows the machine to be programmed with many possibilities but with great
simplicity.
Do not modify the configuration settings without knowing exactly what their effect will be on the
machine operation as a whole.
