Page 6 of 12
Dry contact connections to RV system
The GC154 will receive the command to extend, stop or retract from the Vehicles smart
control system which is sent to the connected awning through the motor control wiring
harness.
Specifications
Power:
110VAC / 60Hz
AC Input: White = Neutral / Black = Live / Green = Earth
To the Motor: White = Neutral / Red = Direction 1 / Black = Direction 2 / Green =
Earth
Ambient T: 0 - 130°F
Installation
A circuit breaker protected 15A/115v AC power supply is required form the Vehicles
power distribution panel as shown in the diagram below.
1.
Install a UL approved 110VAC junction box in which to make the electrical
connections.
2.
Route the Awning’s Motor cable to this location and make the connections to the
GC154 in accordance with NEC requirements.
3.
Mount the GC154 on the wall using the screws and tape provided.
Summary of Contents for GC154
Page 7: ...Page 7 of 12 ...
