28 |
P a g e
B.
ADJUSTING PITCH
NOTE: Your G-2000 and G-1500 Awnings will have the pitch adjusted according to
manufacturer specifications. Please note the position of the pitch and DO NOT
overtighten. This may damage the awning.
1. Extend the awning about 18”
2. On the arm selected, loosen the two(2) nylon nuts on the upper side of the arm
connection using a 19mm open-end wrench.
3. Locate the larger adjustment bolt located on the bottom of the upper arm
connection. (Figure 18) Using a 19mm open-end wrench rotate the bolt counter-
clockwise to LOOSEN or lower the pitch. If the pitch is lowered too far you may
turn the bolt clockwise or TIGHTEN to raise the pitch.
DO NOT OVERTIGHTEN.
4.
Tighten the two(2) nylon nuts located on the side of the upper arm connection.
5. Close the awning completely to ensure a proper fit.
(Figure 18)
Adjustment bolt
Summary of Contents for G-1500
